- PTFE Series
- Suspension Molding Powder Resin (JF-4TM, JF-4TN-S, JF-4TN): It has good finish and waxy feel, and can be used for making electrical insulation, capacitor films, tubes, rods, plates, sealing materials, etc. It is packaged in a sealed double-layer polyethylene bag, with a net content of 20kg per barrel, and should be stored in a clean, cool, and dry place.
- Medium Size Particle Resin (JF-G90, JF-G120, JF-GD180): With uniform particle size, it is suitable for processing molded large plates, turning films, small molded products, etc. It is packaged in a sealed double-layer polyethylene bag, with a net content of 25kg per barrel, and the storage requirements are the same as those of the suspension molding powder resin.
- Free Flow Resin (JF-4A1, JF-4A2, JF-4A3): Different particle characteristics make it applicable for isostatic pressing, compression molding of rods, tubes, plates, etc. It is packaged in a sealed double-layer polyethylene bag, with a net content of 25kg per barrel, and the storage precautions are the same as above.
- Fine Powder Resin (JF-4D, JF-4D08): High tensile strength allows it to be used for making extruded tubes, rods, sealing tapes, etc. It is packaged in a sealed double-layer polyethylene bag, with a net content of 20kg per barrel, and needs to be stored in a clean, cool, and dry warehouse.
- Fine Powder Resin For Fiber (JF-4D06, JF-4D07): Good fiber-forming property makes it suitable for making filter material fibers and membrane materials. It is packaged in a sealed double-layer polyethylene bag, with a net content of 20kg per barrel, and the storage conditions are consistent with the above.
- Fine Powder Resin For Tube (JF-4DE15, JF-4DE1201, JF-4DE1202): The finished product has good transparency, pressure resistance, and heat resistance, and is used for replacing PFA in the processing of heat exchanger tubes and capillary tubes. It is packaged in a sealed double-layer polyethylene bag, with a net content of 20kg per barrel, and attention should be paid to preventing resin agglomeration and impurity mixing during storage.
- Dispersion (JF-4DCW, JF-4DCM, JF-4DCD, JF-4DCB, JF-4DCF, JF-4DCT): Milky white or light yellow aqueous dispersion, used for impregnating glass fiber, asbestos, etc. The packaging can be 25kg or 1000kg barrels, and it needs to be shaken regularly after three months of storage to prevent precipitation.
- FEP Series
- FEP Resin (FJP-1, FJP-2, FJP-3, FJP-4): Translucent granular solid, used for insulation and sheath of high-temperature wire and cable, etc. It is packaged in a polyethylene plastic bag or double-layer reinforced plastic bag, with a net content of 25kg per barrel (bag), and should be stored in a clean, cool, and dry place.
- FEP Dispersion (FJC-R0610, FJC-R0620, FJC-RT0680, FJC-RT0690, FJC-RT0780): Light white or light yellow translucent liquid, can be used for coating, impregnation, etc. The packaging is 25kg or 1000kg barrels, and transportation and storage should avoid severe vibration, high temperature, and low temperature.
- Fusible Polytetrafluoroethylene (PFA) (FJY-A03S, FJY-A06S, FJY-A15S, FJY-A30S): Translucent granules or white powder, used for lining of pipes, pumps, valves, etc., and cable extrusion. It is packaged in a polyethylene plastic bag or double-layer reinforced plastic bag, with a net content of 25kg per barrel (bag). Attention should be paid to rainproof, sunproof, and moisture-proof during storage.
- Ethylene Tetrafluoroethylene Copolymer (ETFE) (JH-WH101, JH-WH102, JH-WH103, JH-WH104): Transparent granules, used for extrusion and injection molding of wires, cables, pipes, etc. It is packaged in a polyethylene plastic bag or double-layer reinforced plastic bag, with a net content of 25KG per barrel (bag), and should be stored in a clean, dry, and cool place.
- Fluorine Rubber Series
- JHF26 Series: White elastomer with good mechanical properties and oil resistance, used for making gaskets, washers, etc. It is packaged with the rubber sheet isolated by a separation film and then sealed in a polyethylene film bag, with a net content of 25kg per box. It should be stored in a clean, cool, and dry place, and avoid moisture and severe vibration during transportation.
- JHF246 Series: Copolymerized from vinylidene fluoride, hexafluoropropylene, and tetrafluoroethylene, with excellent performance and wide applications. The packaging, storage, and transportation requirements are the same as those of the JHF26 series.
- Peroxide-vulcanized Fluorine Rubber (JHF530, JHF533, JHP530, JHP533, JI530, JHL533): With various excellent properties, it is used for seals in the automotive, chemical, and other industries. The packaging, storage, and transportation requirements are the same as those of the above fluorine rubber series.
- Fluorine – containing Monomers and Fine Chemicals
- Hexafluoropropylene (HFP): A basic raw material in the organic fluorine industry, used for producing fire extinguishing agents, fluorine rubber, etc. It is packaged in cylinders or tank trucks, with a filling ratio of 1.06kg/L. Attention should be paid to safety during transportation and storage.
- Octafluorocyclobutane (C-318): Used in the food industry and other fields. The filling ratio of the cylinder is 1.296kg/L. Transportation and storage should prevent leakage, avoid severe vibration, and keep away from heat sources.
- Tetrafluoropropanol (TFP): Can be used as a solvent, such as in the production of optical discs. It is packaged in a special 200L steel drum and should be stored in a well – ventilated place, avoiding direct sunlight.
- Octafluoropentanol (OFP): Used in optical disc coating solvents, etc. It is packaged in 250kg barrels and should be stored in a well – ventilated place, avoiding sunlight.
- Hydrofluoroether Series (HFE-458, HFE-6512, HFE-347): Environmentally friendly solvents, cleaners, or coolants, used in electronic product cleaning, lithium battery electrolyte additives, etc. They are packaged in stainless steel drums, with specifications such as 250kg/barrel or 25kg/barrel. The storage and transportation precautions are different, and attention should be paid to ventilation and protection during use.
- Hexafluoropropylene (HFP): A basic raw material in the organic fluorine industry, used for producing fire extinguishing agents, fluorine rubber, etc. It is packaged in cylinders or tank trucks, with a filling ratio of 1.06kg/L. Attention should be paid to safety during transportation and storage.
- Octafluorocyclobutane (C-318): Used in the food industry and other fields. The filling ratio of the cylinder is 1.296kg/L. Transportation and storage should prevent leakage, avoid severe vibration, and keep away from heat sources.
- Tetrafluoropropanol (TFP): Can be used as a solvent, such as in the production of optical discs. It is packaged in a special 200L steel drum and should be stored in a well – ventilated place, avoiding direct sunlight.
- Octafluoropentanol (OFP): Used in optical disc coating solvents, etc. It is packaged in 250kg barrels and should be stored in a well – ventilated place, avoiding sunlight.
- Hydrofluoroether Series (HFE-458, HFE-6512, HFE-347): Environmentally friendly solvents, cleaners, or coolants, used in electronic product cleaning, lithium battery electrolyte additives, etc. They are packaged in stainless steel drums, with specifications such as 250kg/barrel or 25kg/barrel. The storage and transportation precautions are different, and attention should be paid to ventilation and protection during use.
- PVDF Series
